NORTHERN CMS DVR HOW TO
NORTHERN CMS DVR SOFTWARE
NORTHERN CMS DVR PASSWORD

In our example, we added the following information: In the next screen add your IP camera information as shown below: In Camera Management section, click Custom Adding. Open the Camera menu as shown in the picture below.

NORTHERN CMS DVR HOW TO

If youвЂ™re not sure how to find the cameraвЂ™s IP address or modify it, consult the manual that the camera comes with.

NORTHERN CMS DVR PASSWORD

In our example, the cameraвЂ™s IP address is 192.168.1.100 and we already know the username and the password to access it.

NORTHERN CMS DVR SOFTWARE

Each camera has its own software for scanning and modifying the IP address, making sure it matches the IP range as shown on the previous diagram. We assume youвЂ™ve already modified the cameraвЂ™s IP address. The gateway is 192.168.1.1 and represents the routerвЂ™s internal address. Go to the Network and make sure the IP address is in the same range as the cameraвЂ™s IP address. Right-click with the mouse and then hit Menu. Login directly to your recorder using your username and password. LetвЂ™s start setting up the IP address on your recorder. Your network IP range may be different than the one shown in this example, however, the idea and the procedure are the same.

The IP camera, the laptop, and the recorder must be on the same network and, of course, their IP addresses must be one the same IP range. The setup process is quite simple, double-check the diagram shown in the previous section. How to add an ONVIF camera to a Hikvision NVR or DVR? ThatвЂ™s not very important in this demonstration, all we need is a laptop, the camera going to the router and the recorder connected to the same router. There may be other cameras hooked up directly to the recorder (they can be HD analog cameras, or other IP cameras going to a built-in PoE switch, etc). The IP address of the Hikvision DVR/NVR is 192.168.1.150. The diagram shows a laptop with the IP address 192.168.1.5 and the ONVIF cameraвЂ™s IP address is 192.168.1.100 which is wired to the router. The wiring diagramД«efore you start doing the settings, itвЂ™s important to understand how these devices will be connected and addressed. If you donвЂ™t know if your Hikvision DVR supports IP cameras than google the model and find the information on the specification page on the Hikvision website. All Hikvision NVRs support ONVIF protocol, meaning you can connect/add third-party cameras as long as these cameras are ONVIF compliant. This one doesnвЂ™t need too much explanation, itвЂ™s a Network Video Recorder and itвЂ™s designed to work with IP cameras. For example, you have a model like the Hikvision DS-7208HGHI Turbo Hybrid DVR you are ready to get your IP camera on as long as it is the camera itself is ONVIF compliant. The number of supported IP cameras varies from one IP camera to 2, 4, and more (it depends on the model of the DVR). These types of DVRs are called hybrid DVRs and they support HD over coax analog cameras (such as HD-TVI and AHD), regular analog cameras (CVBS) and also the IP cameras. There are two types of recorders that work with ONVIF IP cameras: LetвЂ™s clarify which Hikvision recorders are compatible and are able to correctly show third-party ONVIF cameras.

Which Hikvision recorders work with ONVIF cameras? In this guide we will explain step-by-step how to add an ONVIF IP camera to a Hikvision recorder.

A third party ONVIF IP camera is a camera that supports the ONVIF protocol and you can hook up that camera to any Hikvision recorder (hybrid DVR or NVR). ItвЂ™s very easy to add an ONVIF IP camera to a Hikvision DVR or NVR.

Northern cms dvr